For M.2

$\JJ-GMP-102M2r/Slimline SAS(SFF-8654) PCIe Slot f. 2xM.2\$

JJ-GMP-102M2r/Slimline SAS(SFF-8654) PCIe Slot f. 2xM.2
item number: A 2755

PCIe Slot (Full-height) with swap in/out tray for 2 x M.2 SSD Slimline SAS
Support 2x M.2 NVMe SSD with M-Key PCIe 3.0/4.0 x4 or B+M-Key PCIe 3.0 x2
M.2 NVMe SSD length 30/42/60/80mm
2 x Slimline SAS (SFF-8654) 4i connectors (SFF-9402 rev1.1 spec.), 2 x mini 4pin power connectors, 2 x 2pin fan jumper (pitch 2.5)
Tray: Slimline SAS x8 connector
With triangle metal keylock design
With anti-vibration springs
Stainless frame/tray and aluminum heatsink and front bezel
Adjustable tool-less standoff
LED x 1 for Power on : solid green / Accessing : Orange blinking
Tool-less aluminum heat sink and thermal pads
Dim: 159mm x 120.5mm x 18.5mm
Weight : 330g
Cables are not included
NB: The Hot Swap function depends on the mainboard

Only if the mainboard provides the hotplug function, the item can support this function. Because most of NVMe motherboards provide limited hot-plug, we suggest to use a PCIe 3.0 or 4.0 NVMe HBA card, or NVMe RAID card to enjoy NVMe hot-swap
If your system environment does NOT support NVMe hot-plugging, you must turn OFF the power of the system BEFORE you pull out the installed NVMe M.2 SSD to avoid unexpected failure in the system.

-- €

$\JJ-GOP-102M2r / OCuLink(SFF-8612) PCIe Slot f. 2xM.2 NVMe\$

PCIe Slot (Full-height) with swap in/out tray for 2 x M.2 SSD
Support 2x M.2 NVMe SSD with M-Key PCIe 3.0/4.0 x4 or B+M-Key PCIe 3.0 x2
M.2 NVMe SSD length 30/42/60/80mm
2 x OCuLink (SFF-8611) 4i connectors (SFF-9402 rev1.1 spec.), 2 x mini 4pin power connectors, 2 x 2pin fan jumper (pitch 2.5)
Tray: Slimline SAS x8 connector
With triangle metal keylock design
With anti-vibration springs
Stainless frame/tray and aluminum heatsink and front bezel
Adjustable tool-less standoff
LED x 1 for Power on : solid green / Accessing : Orange blinking
Tool-less aluminum heat sink and thermal pads
Dim: 159mm x 120.5mm x 18.5mm
Weight : 330g
Cables are not included
NB: The Hot Swap function depends on the mainboard

Only if the mainboard provides the hotplug function, the item can support this function. Because most of NVMe motherboards provide limited hot-plug, we suggest to use a PCIe 3.0 or 4.0 NVMe HBA card, or NVMe RAID card to enjoy NVMe hot-swap
If your system environment does NOT support NVMe hot-plugging, you must turn OFF the power of the system BEFORE you pull out the installed NVMe M.2 SSD to avoid unexpected failure in the system.

-- €

$\JJ-GP-101M2-Br M.2 NVMe PCIe Adapter\$

With PCIe Full height adapter + Low profile bracket adapter
PCIe Brackets with swap in/out tray for 1 x M.2 SSD
For 1 x M.2 NVMe SSD (length 30/42/60/80mm)
PCIe 3.0/4.0 x4 NVMe M.2 M key SSD
Support 1 x PCIe 3.0 / PCIe 4.0 M.2 NVMe SSD with M key (PCIe 3.0/4.0 x4) or B+M Key (PCIe 3.0 x2)
With triangle metal keylock design
With anti-vibration springs on the tray
Stainless frame/tray and aluminum front bezel
LED x 1 : Power on : Blue & Accessing : Purple blinking
Heat sink pad and aluminum heat sink cover
Dim: 167.3mm x 120.8mm x 19mm [Full height bracket]
Dim: 167.3mm x 84mm x 19mm [Low profile bracket ]
Weight : 115g
NB: The Hot Swap function depends on the mainboard

JJ-GP-101M2-Br connects the M.2 via PCIe Bus but the NVMe hot-swap function in PCIe Bus ist still limited and depends on the mainboard.
Only when the PCIe Bus on mainboard provides the hotplug function, the JJ-GP-101M2-Br can support the hot swap function.
If NOT, please power OFF the system BEFORE swap in/out the installed NVMe M.2 SSD to avoid unexpected failure in the system.
If you need the hot swap function please refer to other models, or to the suggested NVMe HBA / RAID card information.

-- €

$\JJ-M2U03 / M.2 NVMe to U.2 SSD (SFF-8639) Adapter\$

-- €